Gotrax Tiller Hook GXL V2 / GXL V2 2020 / XR / XR Ultra

Description

****Due to the 3d printing process, our hooks are not as strong as the original injection molded hooks that come with the Gotrax scooters. They may break if the tail hook is not adjusted correctly during installation. They may also break while being carried if the scooter is bounced around to much. If the scooter is under heavy use, we would not recommend purchasing our product.****
These hooks go on the tiller of the scooter and are part of the locking mechanism when folding your scooter. Please make sure to choose the correct hook that matches the model of your electric scooter.
These are 3d printed and some of the surfaces may have imperfections from the printing process, but won't be very noticeable.
These are available in multiple colors. Please choose the color you would like. We also have the tail hook and outer brake cable housings in-stock to replace the stock red that comes with some of the scooters.
These fit the following model Gotrax Scooters:
GXL V2
GXL V2 2020 Edition
XR
XR Ultra
Installation instructions:
-Loosen the 2 screws holding the tail hook to where it can slide
-Hold the rear fender down against the tire
-Slide/adjust the tail hook to where it just catches the tiller hook
-Tighten down the 2 tail hook screws
-This should give the correct clearance.